Brother DCP-L5500D Service Manual page 63

Error message
First line
No Paper T4 Reload paper in Tray
4.
No Paper T5 Reload paper in Tray
5.
No Toner Open the Front Cover,
then install Toner
Cartridge.
No Tray Please install the
Attachment Tower Tray Attachment
Brackets.
No Tray T1 Reinstall Tray.
No Tray T2 Reinstall Tray 2.
Second line
When printing from paper tray 4,
the T4(LT or TT) paper empty
sensor detected that there was no
paper set in paper tray 4. (At Fax /
List printing)
When printing from paper tray 4,
the T4(LT or TT) paper empty
sensor detected that there was no
paper set in paper tray 4.
When printing from paper tray 5,
the T5TT paper empty sensor
detected that there was no paper
set in paper tray 5. (At Fax / List
printing)
When printing from paper tray 5,
the T5TT paper empty sensor
detected that there was no paper
set in paper tray 5.
The toner amount detection
sensor detected that the toner
cartridge was not set.
When the TT was connected, TT
balance sensor L/R wasn't
connected properly.
When printing from paper tray 1 to
5, the T1 paper feed sensor
detected open paper tray 1 (before
registering printing data to
engine).
When printing from paper tray 1 to
5, the T1 paper feed sensor
detected open paper tray 1 (after
registering printing data to
engine).
When printing from paper tray 2 to
5, the T2(LT or TT) paper feed
sensor detected open paper tray 2
(before registering printing data to
engine).
When printing from paper tray 2 to
5, the T2(LT or TT) paper feed
sensor detected open paper tray 2
(after registering printing data to
engine).
2-28
Description
Error Refer
codes to:
--- 4.2.1
9305 2-69
--- 4.2.1
9306 2-69
6101 2-47
1F00 2-44
8501 2-63
8505 2-64
8502 2-63
8506 2-64
Confidential