Brother DCP-L5500D Service Manual page 389

(7) Remove the tape to remove the modem FG harness L from the main shield plate.
Assembling Note:
• Attach the modem FG harness L on the right side than "A" using a tape.
(8) Remove the three screw cup M3x8 screws (Black), and remove the ADF FG harness,
FB FG harness, modem FG harness L and main shield plate.
(9) Remove the taptite cup S M3x8 SR screw, and remove the panel FG harness.
"A"
ADF FG harness
Modem FG Tape
harness L
Screw cup M3x8
(Black)
FB FG harness
Harness routing: Refer to
Tape
Panel FG harness
Taptite cup S M3x8 SR
Main shield plate
Fig. 7-13
"1. ADF unit - Main PCB
Main PCB ASSY".
7-10
ASSY", "2. Document scanner unit -
Confidential