Panasonic KX-NS1000 Installation Manual page 159

1.
Make sure that both connector cases (frame ground) of the RS-232C cross cable (shielded cable) are
conductive. If they are not conductive, make sure that both connector cases of the cable are firmly
connected.
2.
If this is not possible, connect the frame of the PBX to the frame of the PC/Printer using a grounding
wire in order to prevent difference in the electrical potentials.
Pin Assignments
No.
6 1
9 5
Connection Charts
For connecting a printer/PC with a 9-pin RS-232C connector
PBX (9-pin)
Circuit Type Signal
(EIA) Name
BB RD (RXD)
BA SD (TXD)
CD ER (DTR)
AB SG
CC DR (DSR)
CA RS (RTS)
CB CS (CTS)
Document Version 2016-03
Signal Name
2 RD (RXD)
3 SD (TXD)
4 ER (DTR)
5 SG
6 DR (DSR)
7 RS (RTS)
8 CS (CTS)
Pin No.
2
3
4
5
6
7
8
Function
Receive Data
Transmit Data
Data Terminal Ready
Signal Ground
Data Set Ready
Request To Send
Clear To Send
Printer/PC (9-pin)
Signal
Pin No.
Name
2 RD (RXD)
3 SD (TXD)
4 ER (DTR)
5 SG
6 DR (DSR)
7 RS (RTS)
8 CS (CTS)
4.10 Connection of Peripherals
Circuit Type
EIA CCITT
BB 104
BA 103
CD 108.2
AB 102
CC 107
CA 105
CB 106
Circuit Type
(EIA)
BB
BA
CD
AB
CC
CA
CB
Installation Manual 159