Panasonic KX-NS1000 Installation Manual page 275

Pure ip-pbx
Hide thumbs Also See for KX-NS1000:
Table of Contents

Advertisement

Up to 4 IP addresses can be assigned to the KX-NS1000's optional DSP cards. The following example shows the port number ranges
set for each IP address:
[Example]
Port forward destination
DSP#1–1
DSP#1–2
DSP#2–1
DSP#2–2
For the KX-UT series:
Application
SIP Proxy
CWMP
HTTP
HTTPS
SIP-MLT Data
HTTP
HTTPS
NTP
Document Version 2016-03
5.9.4 Installing IP Phones at a Remote Site with a Built-in Media Relay Gateway
LAN Side Port Number
UDP Port No. for SIP Extension
Server
(refer to PC Programming Manual
"9.5.1 PBX Configuration—[1-1]
Configuration—Slot—Site
Property—Main—Port Number")
CWMP (HTTP) Port No. for
SIP-MLT
(Use the same value as in step 11 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway".)
CWMP (HTTPS) Port No. for
SIP-MLT
(Use the same value as in step 11 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway".)
Data Transmission Protocol
(HTTP) Port No. for SIP-MLT
(Use the same value as in step 11 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway".)
Data Transmission Protocol
(HTTPS) Port No. for SIP-MLT
(Use the same value as in step 11 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway".)
123
*1
Port number range
16000–16511
16512–17023
17024–17535
17536–18047
WAN Side Port Number
NAT-SIP Proxy Port No.
(Use the same value as NAT - SIP
Proxy Server Port No. in step 5 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway")
NAT - CWMP Server (HTTP) Port
No.
(Use the same value as in step 5 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway".)
NAT - CWMP Server (HTTPS) Port
No.
(Use the same value as in step 5 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway".)
NAT - SIP-MLT Data Download
Server (HTTP) Port No.
(Use the same value as in step 5 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway".)
NAT - SIP-MLT Data Download
Server (HTTPS) Port No.
(Use the same value as in step 5 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway".)
NAT - NTP Server Port No.
(Use the same value as in step 5 of
"Programming the KX-NS1000 with
Built-in Media Relay Gateway".)
Installation Manual
275

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents