Siemens PM-E F pm DC24V PROFIsafe Installation And Operating Manual page 179

Terminal assignment
The figure below shows the terminal assignment of the EM 1 F-RO DC24V/AC24..230V/5A
for the supported terminal module TM-E30S44-01, TM-E30C44-01, TM-E30S46-A1 and TM-
E30C46-A1.
Figure 7-55
Table 7- 38
Terminal
3
4
A4
A3
7
8
A8
A7
ET 200S Distributed I/O System - Fail-Safe Modules
Installation and Operating Manual, 08/2008, A5E00103686-07
Terminal assignment TM-E...44-01/TM-E...46-A1 for EM 1 F-RO DC24V/AC24..230V/5A
Terminal assignment of the TM-E...44-01/TM-E...46-A1
Designation
IN P Terminal for 24 VDC control voltage
IN M Terminal for control voltage ground
AUX 1 At TM-E...46-A1: AUX 1 bus implemented. Connection to terminals A3
to A16 for any PE connection.
Individual grouping of load current supplies is supported.
AUX 1 At TM-E...46-A1: AUX 1 bus implemented. Connection to terminals A3
to A16 for any PE connection.
Individual grouping of load current supplies is supported.
IN P Terminal for 24 VDC control voltage
IN M Terminal for control voltage ground
AUX 1 At TM-E...46-A1: AUX 1 bus implemented. Connection to terminals A3
to A16 for any PE connection.
Individual grouping of load current supplies is supported.
AUX 1 At TM-E...46-A1: AUX 1 bus implemented. Connection to terminals A3
to A16 for any PE connection.
Individual grouping of load current supplies is supported.
7.8 1 F-RO DC24V/AC24..230V/5A Digital Electronic Module
Fail-Safe Modules
179