Installing - Siemens PM-E F pm DC24V PROFIsafe Installation And Operating Manual

3.3

Installing

Installing the fail-safe modules
The fail-safe power modules, electronic modules, and terminal modules are part of the ET
200S range of modules. They are installed using the same procedure as for all standard
modules in an ET 200S.
Detailed information about module installation is available in the
System
Installation dimensions
Note that fail-safe modules are 30 mm wide (twice the width of standard ET 200S modules).
Otherwise, the information provided in the
Instructions applies.
ET 200S Distributed I/O System - Fail-Safe Modules
Installation and Operating Manual, 08/2008, A5E00103686-07
Operating Instructions.
Address Assignment and Installation
ET 200S Distributed I/O
ET 200S Distributed I/O System
3.3 Installing
Operating
31