Assigning Modules Of An Et 200S - Siemens PM-E F pm DC24V PROFIsafe Installation And Operating Manual

Configuring

2.2 Assigning Modules of an ET 200S

2.2 Assigning Modules of an ET 200S
Introduction
This section presents the ET 200S module assignments for:
● Fail-safe power modules to terminal modules
● Fail-safe electronic modules to terminal modules
● Power modules to electronic modules/motor starters
Assigning Fail-Safe Power Modules to Terminal Modules
You can use the F-power modules with the following terminal modules:
Table 2- 1
F-Power Modules
PM-E F pm DC24V PROFIsafe
and
PM-E F pp DC24V PROFIsafe
PM-D F DC24V PROFIsafe
Assigning Fail-Safe Electronic Modules to Terminal Modules
You can use the following fail-safe electronic modules and terminal modules together:
Table 2- 2
F-Electronic Modules
4/8 F-DI DC24V PROFIsafe,
4 F-DI/3 F-DO DC24V
PROFIsafe, 4 F-DODC24V/2A
PROFIsafe and
1 F-RO DC24V/AC24..230V/5A TM-E30C44-01 (snap-in type)
22
Assigning Fail-Safe Power Modules to Terminal Modules
Terminal Modules
TM-P30S44-A0 (screw-in type)
TM-P30C44-A0 (snap-in type)
TM-PF30S47-F1 (snap-in type)
Assigning Fail-Safe Electronic Modules to Terminal Modules
Terminal Modules
TM-E30S46-A1 (screw-in type)
TM-E30C46-A1 (snap-in type)
TM-E30S44-01 (screw-in type)
ET 200S Distributed I/O System - Fail-Safe Modules
Installation and Operating Manual, 08/2008, A5E00103686-07
For a Description, See ...
Terminal Modules
manual
for the ET 200S
distributed I/O system
For a Description, See ...
ET 200S Distributed
I/O System
Operating
Instructions