Siemens PM-E F pm DC24V PROFIsafe Installation And Operating Manual page 223

F-Power Modules
supported terminal modules, 22
F-Systems, 13
functional extra-low voltage
safe, 33
Functions
for diagnostics, 43
Fuse, external
PM-E F pm DC24V PROFIsafe, 71
PM-E F pp DC24V PROFIsafe, 89
G
General Technical Specifications, 49
Grounding bus, 21
Guide
to manual, 5
H
H/F Competence Center, 6
I
I/O system
Distributed, 13
IEC 61131, 51
Information
About this manual, 3
Input delay, 38
EM 4/8 F-DI DC24V PROFIsafe, 108, 109
Input signals
Capacitive crosstalk, 66
Inserted F-module (dimension drawing)
With terminal modules, 197
Inserting
F-Module, 36
Insertion and removal
F-modules during operation, 36
Installation dimension
F-modules, 31
Installing
F-modules, 31
interconnecting
of power modules, 21
Interface module
Can be used for ET 200S, 16
Interference
pulse-shaped, 53
sinusoidal, 56
ET 200S Distributed I/O System - Fail-Safe Modules
Installation and Operating Manual, 08/2008, A5E00103686-07
Internal error
EM 4 F-DI/3 F-DO DC24V PROFIsafe, 157
EM 4 F-DO DC24V/2A PROFIsafe, 172
EM 4/8 F-DI DC24V PROFIsafe, 130
PM-D F DC24V PROFIsafe, 101
PM-E F pm DC24V PROFIsafe, 76
PM-E F pp DC24V PROFIsafe, 91
reaction to, 47
Internal sensor supply, 109, 142
Internet
Service & Support, 7
IP20, 60
Isolation stability, 60
Isolation test voltages, 60
L
Lag requirement
of actuators, 38
LED display
Diagnostics, 44
of faults, 44
Limitation Maximum configuration, 25
Line break, 46
line cross-section, 33
Literature, additional, 4
Load current supply, failure
PM-D F DC24V PROFIsafe, 101
Load voltage missing, 46
Loads
capacitive switching, 74, 145, 171
Switching grounded, 65
M
Machine protection
Applications in, 44
Manual
Contents, 5
Purpose, 3
Scope, 3
Marking for Australia, 51
Maximum configuration
ET 200S with F-modules, 24
Limitation, 25
per potential group, 25
Index
223