Disassembly; Removing And Replacing The Battery Door - Motorola A1000 Service Manual

Level 1 and 2 Service Manual

Disassembly

G
G

Removing and Replacing the Battery Door

6809490A77-O
This section describes how to disassemble an A1000 telephone. Tools and equipment
used are listed in Table 6, preceding.
Many of the integrated devices used in this equipment are vulnerable to damage
from electrostatic discharge (ESD). Ensure adequate static protection is in place
when handling, shipping, and servicing the internal components of this equipment.
Avoid stressing the plastic in any way to avoid damage to either the plastic or
internal components.
To Remove the Battery Door
1. Ensure the phone is turned off.
2. Press the battery door release button.
3. Slide the battery door as indicated by the white arrow.
4. Carefully lift the battery door up and away from the phone.
Figure 4. Removing the Battery Door
To Replace the Battery Door
1. Align the battery door tabs to the slots on the back of the phone.
2. Lower the battery door onto the back of the phone.
3. Slide the battery door into its final position.
October 4, 2004
Disassembly
Battery Door Release
Button Location
17