Removing And Replacing The Battery Shield - Motorola A1000 Service Manual

Level 1 and 2 Service Manual

Removing and Replacing the Battery Shield

6809490A77-O
To remove the battery shield
1. Ensure the phone is turned off.
2. Remove the battery door.
3. Remove the battery.
4. Remove the USIM.
5. Remove the rear housing.
6. Using tweezers, release the locking tabs by separating the rear housing wall
from the battery shield.
7. Lift the battery shield out from the rear housing.
Battery
Shield
Housing
Wall
Figure 13. Removing the Battery Shield
To Replace the Battery Shield
1. Align the transceiver board with the rear housing and press it in place.
2. Replace the transceiver board, rear housing, USIM, battery, and battery door
as described in the procedures.
October 4, 2004
Disassembly
27