Level 1 and 2 Service Manual
6809490A77-O
8.
Using the disassembly tool, disengage the joystick flex from its connector.
Figure 15. Removing and Replacing the Joystick Assembly
To Replace the Joystick Assembly
1.
Align the joystick flex with its connector and press it into place.
2.
Align the 2 joystick locking tabs with the transceiver board and snap it into
place.
3.
Replace the transceiver board, rear housing, USIM, battery, and battery door
as described in the procedures.
October 4, 2004
Joystick
Flex
Disassembly
Disassembly
Tool
29