Disassembly
Removing and Replacing the MFT Assembly
32
MFT Assembly
To Remove the
1.
Follow the procedures to remove the:
•
Battery door
•
Battery
•
USIM Card
•
Rear Housing
•
Transceiver Board
•
Joystick Assembly
•
Display Assembly
2.
Disengage the 2 MFT assembly locking tabs.
3.
Lift the MFT assembly away from the transceiver board.
MFT Assembly
Locking Tab
Figure 18. MFT Assembly Removal
To Replace the MFT Assembly
1.
Align the MFT assembly over the transceiver board and snap the locking tabs
in place.
2.
Replace the display assembly, joystick assembly, transceiver board, rear hous-
ing, USIM, battery, and battery door as described in the procedures.
October 4, 2004
A1000
MFT Assembly
Locking Tab
6809490A77-O