Level 1 and 2 Service Manual
Removing and Replacing the Camera/Gaming Keypad
6809490A77-O
Camera/Gaming Keypad
To Remove the
1.
Follow the procedures to remove the:
•
Battery door
•
Battery
•
USIM Card
•
Rear Housing
•
Transceiver board
•
Joystick Assembly
•
Display Assembly
•
MFT Assembly
2.
Disengage the 2 camera/gaming keypad locking tabs.
Note: The rubber camera grommet covering the camera will easily fall out when
the upper endo is removed.
Camera/Gaming
Keypad Locking
Tab
Figure 19. Camera/Gaming Keypad Removal
3.
Using the disassembly tool, carefully disengage the camera/gaming keypad flex
from its connector.
October 4, 2004
Disassembly
Camera/Gaming
Keypad Locking
Tab
Camera/Gaming
Keypad
33