Level 1 and 2 Service Manual
Removing and Replacing the Camera
6809490A77-O
Camera
To Remove the
1.
Follow the procedures to remove the:
•
Battery door
•
Battery
•
USIM Card
•
Rear Housing
•
Transceiver board
•
Display Assembly
•
MFT Assembly
•
Camera/Gaming Keypad
2.
Using the disassembly tool, carefully disengage the camera flex from its
connector.
Camera Flex
Connector
Figure 21. Camera Removal
3.
Lift the camera away from the transceiver board.
To Replace the Camera
1.
Align the camera flex with its connector on the transceiver board and press it
into place.
2.
Replace the camera/gaming keypad, MFT assembly, display assembly, joystick
assembly, transceiver board, rear housing, USIM, battery, and battery door as
described in the procedures.
October 4, 2004
Disassembly
Camera
Assembly
Disassembly
Tool
35