Figure B-10 Connect Sl2100 Dial Up Connection - NEC SL2100 Programming Manual

SL2100 PC Programming Manual
10. The Connection will now appear in the network connection
screen and can be used by PC Programming when needed.

Figure B-10 Connect SL2100 Dial Up Connection

2.2.3 Login
Specify the User Name and Password that will allow the connection. The
account must exist within the chassis settings 90-02. Like PCPro Accounts,
Login Accounts govern what system data can be accessed from the
chassis.
It is important to note, Login Accounts are not the same as PCPro
Accounts. Thus both chassis Login and PCPro Account settings are NOT
synchronized and are independent of each other.
Once connected, the PCPro access level changes to match the level
assigned to the user name/password used to connect. This access level is
set in 90-02 on the chassis. For example, if you start PCPro in Installer (IN)
mode, but connect to a chassis using an account with an access level of
System Administrator Level 1 (SA), after connecting PCPro assumes the
access level of SA. Once you are disconnected, PCPro reverts back to the
access level IN.
Issue 1.0
B-9