Appendix F Debug Terminal; Overview; Figure F-1 Debug Terminal Dialogs - NEC SL2100 Programming Manual

Debug Terminal
S 1 O
ECTION VERVIEW
PCPro provides a debug terminal that can be used to capture trace logs from the
CPU. The debug terminal communicates with the chassis via the LAN. A TCP
connection on port 5964 is established between the debug terminal and the SL2100.
This port number is blank by default and must be set in PRG 10-20-01 Device 6. In
addition, the DIM Access needs to be enabled in PRG 90-31-01. Any unused
network port can be used as long as it is set in PRG 10-20-01 Device 6.

Figure F-1 Debug Terminal Dialogs

1) Specify
connection
information.
2) Specify the
log file to be
used for data
capture.
SL2100 PC Programming Manual
SL2100
Appendix F
F-1