NEC SL2100 Programming Manual page 49

To setup the Night Mode Switching options:
You can define up to 10 Schedule Patterns for the selected Night Mode Service
Group. Schedule Patterns is made up of time frames of 1, 15, 20 or 30 minutes. Each
time frame is associated with a Night Mode. These settings are linked with 12-03.
1.
2.
3.
4.
5.
6.
SL2100 PC Programming Manual
Enable/disable Automatic Night Mode Service.
This selection enables/disables Night Mode Service for the system. This setting
is linked with 12-01-01. This is a system-wide setting and is applied across ALL
Service Groups.
Assign a name to each Night Mode. This can be used to identify the time frame.
Night Mode names defined here are referred to throughout the system. These
settings are linked to 12-07.
Define Schedule Patterns used by the selected Night Mode Service Group.
Schedule Patterns are comprised of time frames that are associated to Night
Modes. You can define up to 10 Schedule Patterns for the selected Night Mode
Service Group. Schedule Patterns can be made up of 20 time frames. Each
time frame is associated with a Night Mode. These settings are linked with
12-03.
Refer to 5.1 Modifying a Time Frame on page 4-10
View Night Mode Switching Mode Colors on page
Set the time pattern display resolution, options are 1, 15, 20, and 30 minutes.
Specify the Service Patterns applied to each day of the week. Define the
Schedule Pattern used each day of the week by the selected Night Mode
Service Group. These settings are linked with 12-03.
Define public holidays and the Schedule Pattern used by the Night Mode
Service Group on these days. Each pattern has a unique color, clicking on the
date will cycle through all 10 patterns. These settings are linked with 12-04
Issue 1.0
and Figure 4-7 Standard
4-11.
4-9