15.3.4
PLC side setting
■1. Parameter settings
Set the following parameters with the SIEMENS software package.
(1) Ethernet connection type: FETCH/WRITE
(a)
Settings of IP address and subnet mask
Parameters
(b)
Fetch port setting
Options
Addresses
(c)
Write port setting
Options
Addresses
(d)
Precautions for setting
The Keep Alive function of the Siemens CP Module is not supported. Specify 0 for [Keep Alive].
15 - 20
15.3 Ethernet Connection
POINT
POINT
POINT
SIEMENS PLC
For details of SIEMENS PLCs, refer to the following manuals.
➠
SIEMENS PLC user's Manual
Item
IP Address
Subnet mask
Item
Mode
Select [Fetch passive].
Local
IP(dec)
Remote
Local
PORT
(dec)
Remote
Item
Mode
Select [Write passive].
Local
IP(dec)
Remote
Local
PORT
(dec)
Remote
Setting details
PLC side IP address
PLC side subnet mask
Setting details
PLC side IP address
- (Default)
PLC side port No.
- (Default)
Setting details
PLC side IP address
- (Default)
PLC side port No.
- (Default)