Connecting To Ethernet Interface Module (F3Le01-5T, F3Le11-0T) - Mitsubishi Electric GOT2000 Series Connection Manual

7.3.4

Connecting to Ethernet Interface Module (F3LE01-5T, F3LE11-0T)

■1. Switch settings of Ethernet Interface Module
Set the switches accordingly.
(1) IP address switch
Set the IP address with eight Hex rotary switches on the side of the base unit
(2) Condition setting switch
Set the data format, write protection, line processing at TCP timeout error or operation mode with the DIP switch on
the side of the base unit.
Switch No.
1
2
3
4
5
6
7
8
*1 Applicable to only F3LE01-5T.
POINT POINT POINT
Switch setting
Set the switches before mounting the Ethernet Interface Module on the base unit.
F3LE01-5T
IP address switch
Right side view without the cover
Hexadecimal
C0
Decimal
192
Description
Data
code
Write
protect
Reserved
Line processing
on TCP
*1
timeout
Operation mode
F3LE11-0T
Condition setting
switch
A8 FA D2
168 250 210
1 2 3 4 5 6 7 8
OFF
OFF (ASCII)
OFF (not protect)
ON (not available),
OFF (always)
OFF (close the line)
OFF (normal operation)
7.3 Ethernet Connection
Set value
7 - 27
7