Plc Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

4.2.7 PLC Side Setting
RS-232C
interface card
General-purpose interface module
RS-232C/485
interface capsule
■1. Connecting to NV1L-RS2, NC1L-RS2
(1) Communication settings
Make the communication settings using setting switches.
Item
MODE
*1
Transmission speed
*1
Data bit
*1
Parity bit
*1
Stop bit
Initializing method
*1 Adjust the settings with GOT settings.
(2) Settings by switch
Make the communication settings using each setting switch.
(a) Setting of the MODE
Make the MODE settings using the MODE switch.
Command-setting-type start-stop synchronization,
POINT POINT POINT
FUJI PLC
For details of FUJI PLCs, refer to the following manuals.
➠
FUJI PLC user's Manual
Model name
NV1L-RS2
NC1L-RS2
NC1L-RS4
FFU120B
FFK120A-C10
Command-setting-type start-stop synchronization, nonsequence format
9600bps, 19200bps
8bits or 7bits
Even or Odd
Done, None
1bit, 2bits
By switch
(For the NV1L-RS2)
Character configuration
(Front view) (Rear view)
MODE
nonsequence format
Set value
(For the NC1L-RS2)
switches
Operation mode
setting switch
(Front view) (Rear view)
NV1L-RS2
1
Refer to
4 - 21
4 - 22
4 - 24
4 - 26
Switch position
NC1L-RS2
1
4.2 Serial connection
4
4 - 21