Plc Side Settings - Mitsubishi Electric GOT2000 Series Connection Manual

4.2.7 PLC Side Setting
RS-232C
interface card
General-purpose interface module
RS-232C/485
interface capsule
■1. Connecting to NV1L-RS2, NC1L-RS2
(1) Communication settings
Make the communication settings using setting switches.
MODE
Transmission speed
*1
Data bit
*1
Parity bit
*1
Stop bit
Initializing method
*1
(2) Settings by switch
Make the communication settings using each setting switch.
(a) Setting of the MODE
Make the MODE settings using the MODE switch.
Command-setting-type start-stop synchronization,
4 - 22
4.2 Serial connection
POINT POINT POINT
FUJI PLC
For details of FUJI PLCs, refer to the following manuals.
➠
FUJI PLC user's Manual
Model name
NV1L-RS2
NC1L-RS2
NC1L-RS4
FFU120B
FFK120A-C10
Item
*1
Adjust the settings with GOT settings.
(For the NV1L-RS2)
(Front view) (Rear view)
MODE
nonsequence format
Command-setting-type start-stop synchronization, nonsequence format
9600bps, 19200bps
8bits or 7bits
Even or Odd
Done, None
1bit, 2bits
By switch
(For the NC1L-RS2)
Character configuration
switches
Operation mode
setting switch
(Front view)
Refer to
4 - 22
4 - 23
4 - 25
4 - 27
Set value
(Rear view)
Switch position
NV1L-RS2
1
NC1L-RS2
1