Mitsubishi Electric GOT2000 Series Connection Manual page 54

*1
*2
*3
*4
*5
*6
1 - 24
1.3 Option Devices for the Respective Connection
Data transfer in wireless LAN communication may not be as stable as that in cable communication.
A packet loss may occur depending on the surrounding environment and the installation location.
Be sure to perform a confirmation of operation before using this product.
When a wireless LAN configuration of GT Designer3 the [Operation Mode] is set to [access point], the maximum connection
number is a five (recommended).
The product with hardware version A or later (manufactured in December 2013) complies with the regulation.
The product with hardware version A can be used only in Japan.
For information on how to check the hardware version, refer to the following.
➠
GOT2000 Series User's Manual (Hardware)
The product with hardware version B or later (manufactured from October 2014) complies with the regulation.
The product with hardware version B or later can be used in Japan, the United States, the EU member states, Switzerland,
Norway, Iceland, and Liechtenstein.
For information on how to check the hardware version, refer to the following.
➠
GOT2000 Series User's Manual (Hardware)
The product with hardware version D or later (manufactured from May 2016) complies with the regulation.
The product with hardware version D or later can be used in Japan, the United States, the EU member states, Switzerland,
Norway, Iceland, Liechtenstein, China (excluding Hong Kong, Macao, and Taiwan), and South Korea.
For information on how to check the hardware version, refer to the following.
➠
GOT2000 Series User's Manual (Hardware)
The product complies with the RE Directive from March 31, 2017.