■3. Unit address settings
Set the unit address using the unit address setting switch.
■4. Interval time settings
Configure the interval time setting using the RKC communication setting tool (WinPCI).
After the communication is started, set as follows.
Instrument
CFG file
Interval time
For the using method of RKC communication setting tool, refer to the following.
➠
9 - 56
9.5 Temperature Controller Side Setting
Setting item
RKC communication setting tool user's manual
Module address setting switch
Setting range : 0 to F
0
ZTIO_rkc.cfg
0 to 250ms
Set value