Device Range That Can Be Set - Mitsubishi Electric GOT2000 Series Connection Manual

9.6

Device Range that Can Be Set

The device ranges of controller that can be used for GOT are as follows.
Note that the device ranges in the following tables are the maximum values that can be set in GT Designer3.
The device specifications of controllers may differ depending on the models, even though belonging to the same series.
Please make the setting according to the specifications of the controller actually used.
When a non-existent device or a device number outside the range is set, other objects with correct device settings may not
be monitored.
■1. Setting item
Item
Set the device name, device number, and bit number.
Device
The bit number can be set only when specifying the bit of word device.
Information Displays the device type and setting range which are selected in [Device].
Set the monitor target of the set device.
Network
Station No.
*1 The following shows the relation between station numbers of the temperature controller and the GOT data register.
9.6.1 RKC SR Mini HG
Device name
Bit device The bit specification of the word device
Word device Data (..)
To monitor the temperature controller of the specified station No.
1 to 99:To monitor the temperature controller of the specified station No.
100 to 115To specify the station No. of the temperature controller to be monitored by the value of GOT data
*1
register (GD).
Station No.
100
101
:
114
115
POINT POINT POINT
Device settings of RKC temperature controller
Set by a value of "unit address + 1".
• For unit address 0: Set "1".
• For unit address F: Set "16".
Description
GOT data register (GD)
GD10
GD11
:
GD24
GD25
Setting range
Setting range of each word device
..0000 to ..FFFF
9.6 Device Range that Can Be Set
Setting range
1 to 99
(If setting a value outside the range above,
a device range error occurs.)
Device No.
representation
―
Hexadecimal
9 - 73
9