Precautions; Fuji Temperature Controller/Digital Indication Controller - Mitsubishi Electric GOT2000 Series Connection Manual

5.6.1

FUJI Temperature controller/Digital indication controller

Device name
Bit data (0)
*1
Bit data (1)
Bit device
The bit specification
of the word device
Word data (3)
Word device
Word data (4)
*1
5.7

Precautions

■1. Station number settings of temperature controller
In the system configuration, the temperature controller with the station number set with the host address must be
included. For details of host address setting, refer to the following.
➠
■2. FIX processing of temperature controller
The temperature controller power must not be turned off during the FIX processing. Otherwise, data within the non-
volatile memory will corrupt and the temperature controller will be unavailable.
■3. GOT clock control
Since the temperature controller does not have a clock function, the settings of "time adjusting" or "time broad cast" by
GOT clock control will be disabled.
■4. Disconnecting some of multiple connected equipment
The GOT can disconnect some of multiple connected equipment by setting GOT internal device. For example, the
faulty station where a communication timeout error occurs can be disconnected from connected equipment.
For details of GOT internal device setting, refer to the following manual.
➠
■5. Writing multiple points
If the GOT writes multiple points simultaneously, a system alarm may occur and writing cannot be executed correctly.
In this case, take the following corrective action.
(1) Refer to the manual of temperature controller to be used, set the points to be written by the GOT
simultaneously up to" The maximum numbers of words to be written per 1 message" specified
depending on the temperature controllers.
(2) Set the delay time of communication detail settings.
➠
5 - 34
5.7 Precautions
PXF
―
―
30001 to 30141
*1
32001 to 32141
40001 to 40982
42001 to 42982
45001 to 45032
Only reading is possible.
5.4.2 Communication detail settings
GT Designer3 (GOT2000) Screen Design Manual
5.4.2 Communication detail settings
Setting range
PXR PXG
00001 to 00001 ―
10001 to 10016 10001 to 10013
Setting range of each word device
30001 to 30037 30001 to 30100
31001 to 31037 31001 to 31100
40001 to 40120 40001 to 40628
41001 to 41120 41001 to 41628
PXH PUM
― ―
― ―
30001 to 30934
31001 to 31907
30001 to 31397 32001 to 32907
33001 to 33907
34001 to 34907
40001 to 40322
41001 to 41810
42001 to 42810
40001 to 43775
43001 to 43810
44001 to 44810
45001 to 45032
Device No.
representa
tion
Decimal
―
Decimal