Mitsubishi Electric GOT2000 Series Connection Manual page 500

(2) Ethernet connection type: OP communication
(a) S7-200
Set the following parameters.
Module Position
Module Address
Number of connections to configure for this
module
This is a Server connection: Servers
respond to connection request from remote
clients.
Local Properties (Server)
Remote Properties (Client)
Enable the Keep Alive function for this
connection.
(b) S7-200 SMART
The following devices are available to GT21 and GS21.
Set the following parameters.
Ethernet addresses
(c) S7-300/400
Set the following parameters.
• When using the Ethernet module
Properties
• When using the built-in Ethernet port
Device name
Properties
(d) S7-1200
Set the following parameters.
Ethernet addresses
15 - 22
15.3 Ethernet Connection
Item
Value in [Position] of the Ethernet module
IP Address
Subnet mask
Set "1" as the number of connected GOT.
Mark the check box.
Select [Accept all connection requests]
Set "10.00" in [TSAP].
Unmark the check box.
Item
IP Address
Subnet mask
Item
IP Address
Subnet mask
Item
Set [PN-IO]
IP Address
Subnet mask
Item
IP Address
Subnet mask
Setting details
PLC side IP address
PLC side subnet mask
Setting details
PLC side IP address
PLC side subnet mask
Setting details
PLC side IP address
PLC side subnet mask
Setting details
PLC side IP address
PLC side subnet mask
Setting details
PLC side IP address
PLC side subnet mask