8.4
GOT Side Settings
8.4.1
Setting communication interface (Communication settings)
Set the channel of the connected equipment.
Step 1.
Select [Common]
Step 2.
In the [Controller Setting] window, select the channel No. to be used from the list menu.
Step 3.
Set the following items.
• [Manufacturer]: [YOKOGAWA]
• [Controller Type]: [YOKOGAWA GREEN/UT100/UT2000/UTAdvanced]
• [I/F]: Interface to be used
• [Detail Setting]: Configure the settings according to the usage environment.
➠
Step 4.
When you have completed the settings, click the [OK] button.
8 - 34
8.4 GOT Side Settings
2.
[Controller Setting] from the menu.
8.4.2 Communication detail settings
POINT
POINT
POINT
The settings of connecting equipment can be confirmed in [I/F Communication Setting].
For details, refer to the following.
➠
1.1.3 I/F communication setting
3.
Click!