NEC SL1100 Feature Manual page 127

ISSUE 3.5
Instruction Menu on page 2-145
Be sure the Instruction Menu for the active Call Routing Mailbox describes how to use the GOTO
action.
Programming
1. Assign a GOTO action to the active Dial Action Table.
Program Program Name
Number
47-13-01 Dial Action Table Actions: GO-
TO Action - Go to Mailbox (7)
(GOTO)
Operation
For the outside caller:
After Automated Attendant answers, the voice prompts will instruct you on which digits to dial.
InMail Feature Manual
To have Automated Attendant callers dial a single digit to go to a
Call Routing or Announcement Mailbox, enter the mailbox number
in the corresponding Number option.
• For example, to have key 1 go to Call Routing Mailbox 2, for key
1 enter GOTO for the Action and 2 for the corresponding Number.
To have InMail require Automated Attendant callers to enter a Call
Routing or Announcement Mailbox to go to, enter XXX in the corre-
sponding Number option. The key you choose must represent the
first digit in the mailbox numbers.
• For example, to allow callers to go to mailboxes 1 ~ 16, for key 0
enter GOTO for the Action and XXX for the corresponding Num-
ber.
To log into any valid Call Routing or Subscriber Mailbox, enter IXXX
in the corresponding Number option.
• For example, to allow callers to dial 1 plus any Call Routing or
Announcement Mailbox number to go to, for key 1 enter GOTO
for the Action and IXXX for the corresponding Number.
By default, there are no GOTO actions assigned.
Using the Automated Attendant GOTO Action
SL1100
Description
G
2-109