NEC SL1100 Feature Manual page 257

ISSUE 3.5
With Active Sends call immediately to mailbox:
Greeting Recor- • Plays greeting.
ded • Prompts caller to start recording.
With Active
Greeting Not
Recorded
*1. After 24-02-04 Transfer Recall Time.
*2. Custom phone system programming may redirect the unanswered call (for example, to a hunt group or
another extension).
Related Features
Answer Table on page 2-19
Determines how the Automated Attendant answers outside calls on each trunk.
Automated Attendant on page 2-31
The Answer Table determines how the Automated Attendant answers calls.
Routing Mailbox on page 2-213
The mailbox associated with an Answer Table that specifies which dialing options (Dial Action Table)
and announcements are available to Automated Attendant callers.
Caller ID on page 2-43
InMail provides Caller ID data for an Unscreened Transfer as the call is ringing.
Dial Action Table on page 2-60
Defines the dialing options for the Call Routing Mailbox chosen by the active Answer Table.
You cannot program a Call Routing Mailbox as an Unscreened Transfer (UTRF) Dial Action Table
destination.
Forced Unscreened Transfer on page 2-106
The Subscriber Mailbox can optionally convert Automated Attendant Screened Transfers to
Unscreened Transfers.
Next Call Routing Mailbox on page 2-194
The Next Call Routing settings for a Subscriber Mailbox may provide additional options after the caller
leaves a message.
Screened Transfer on page 2-217
After an Automated Attendant caller dials an extension, InMail calls (screens) the destination
extension to see if the transfer can go through.
InMail Feature Manual
Unscreened Transfer (UTRF) Operation
SL1100
U
2-239