NEC SL1100 Feature Manual page 134

SL1100
Programming
1. Assign extensions to the Department Group.
Program
Number
11-07-01
16-02-01
G
2. If co-workers should share this mailbox, enter Group as the mailbox type for each extension in the
Department/Ring Group. This step should be skipped for a "stand-alone" Ring Group.
Program
Number
47-02-01
3. For the Department/Ring Group Mailbox that corresponds to the extension's Department/Ring
Group, assign the mailbox type.
For a Subscriber Mailbox:
Program
Number
16-02-01
11-07
47-03-02
47-03-03
2-116
Program Name
Department Group Pilot Num-
bers
Department Group Assign-
ment for Extensions
Program Name
Mailbox Type
Program Name
Department Group Assign-
ment for Extensions
Department Group Master
Numbers
Mailbox Number
Mailbox Type
Description
Assigns pilot numbers for Department Group.
By default, this entry is 0 (no pilot number assigned).
Set up the Department Group called by the pilot number and the ex-
tension priority when a group is called.
By default, all extensions are assigned to Department Group 1.
Description
Use this option to enable or disable the mailbox. An extension mail-
box is not accessible when it is disabled (even though its stored
messages and configuration are retained in memory.) If disabled, a
user pressing Voice Mail key initiates a remote logon and is asked
to enter their mailbox number. A voice prompt then announces:
"That mailbox does not exist."
Options are: 0 (Undefined) (V3.5 Changed), 1 (Personal), 2 (Group)
By default, station mailboxes are set to Personal (V3.5 Changed).
Description
Set up the Department Group called by the pilot number and the ex-
tension priority when a group is called.
By default, all extensions are assigned to Department Group 1.
Check to see to which Department Group the extension belongs (1
~ 32).
By default, Department Groups do not have master numbers as-
signed.
The Group Mailbox Number is the same as the Department Group
master (pilot) number. Use this option to select the Department
Group master (pilot) number associated with the Group Mailbox you
are programming.
By default, Department Group Mailbox Numbers are not assigned.
Enter 1 to assign the mailbox as a Subscriber Mailbox. Use this op-
tion to set the Group Mailbox type. There are two types of InMail
mailboxes: Subscriber (1) and Routing (2).
By default, Group Mailboxes are set as Subscriber Mailboxes.
ISSUE 3.5
Group (Shared) Mailbox