NEC SL1100 Feature Manual page 56

SL1100
Program
No.
13-04-02 Speed Dialing Number and Name - Name
Per Speed Dialing bin (000 ~ 999) assign a name to
be used when searching through the directory.
If a name is not assigned for a speed dial bin the
speed dial entry will not be listed in the directory.
13-04-11 Speed Dialing Number and Name - Mailbox Num-
ber
15-22-01 Mobile Extension Setup - Mobile Extension Tar-
get Setup
A
Per Mobile Extension, assigned in PRG 11-02, set
which speed dial bin (PRG 13-04) is to be used
when the Mobile extension is called.
To have access to the Mobile Extensions you must
use the PC Programming tool. In PCPRo go to Pro-
gramming/Unregistered Phones/Mobile Extension
list and add the extension numbers programmed in
PRG 11-02-01.
22-02-01 Incoming Call Trunk Setup - Incoming Type
Use this option to set the feature type for the trunk
you are programming.
22-05-01 Incoming Trunk Ring Group Assignment - In-
coming Group Number (V1.5 Changed)
Assign each trunk per day/night mode to one of the
available ring groups (1 ~ 25).
22-11-05 DID Translation Number Conversion - Transfer
Destination Number 1
If the transfer operation mode is set (PRG
22-11-04), and one of the conditions is met, calls will
overflow from the target number to the destination in
this program. If this was a No Answer condition calls
would overflow to this program after the timer in
PRG 22-01-06 expires.
22-11-06 DID Translation Number Conversion - Transfer
Destination Number 2
If the transfer operation mode is set (PRG
22-11-04), and one of the conditions is met, calls will
overflow from Transfer Destination Number 1 to the
destination in this program. If this was a No Answer
condition calls would overflow to this program after
the timer in PRG 22-01-07 expires.
2-38
Program Name / Description
This setting only works when Program 13-04-01
Speed Dial and Incoming Trunk Call match. (V1.5
Added)
Input Data
Maximum 12 Characters (Use di-
al pad to enter name)
0 ~ 544
0 = No Setting
1 ~ 999 = Speed Dial Bin 1 ~ 999
(PRG 13-04)
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID (DDI) Mode Switching
0 = No Setting
01 ~ 25 = Incoming Ring group
102 = VM
103 = Centralized VM
0 = No setting
01 ~ 25 = Incoming Ring Group
102 = VM
103 = Centralized VM (V1.5 Add-
ed)
201 ~ 232 = Department Group
400 = VRS
401 = DISA
501 ~ 599 = Valid Extension
Number/VRS Message (V2.0
Change)
(VRS Message No.)
1000 ~ 1999 = Common ABB Di-
al (000 ~ 999)
0 = No setting
01 ~ 25 = Incoming Ring Group
102 = VM
103 = Centralized VM (V1.5 Add-
ed)
201 ~ 232 = Department Group
400 = VRS
401 = DISA
501 ~ 599 = Valid Extension
Number/VRS Message (V2.0
Change)
(VRS Message No.)
1000 ~ 1999 = Common ABB Di-
al (000 ~ 999)
Automatic Access to VM by Caller ID
ISSUE 3.5
Default
No Setting
0
0
0
1
0
0