HP 4200 User Manual page 105

(subheading)
Since you are an Internet Explorer 6 user, you will need to go to the Microsoft website to download and
install the Microsoft virtual machine (go to the Microsoft website and search on "virtual machine").
Then make sure the virtual machine is turned on. In Internet Explorer, go to:
Internet Options-->Security (tab)-->Custom Level (button)-->Microsoft VM
Select any option other than "disable".
3. I am going to upgrade to firmware version 2.3.xx. Will my printer drivers have to be initialized
again?
If migrating to firmware version 2.3.xx, printers that had been added to earlier firmware versions (2.2.x
or before) need to be associated with their driver again. To do this easily, go to the Printers page and
then click for that printer. Select Drivers. In the drop-down list, select any other driver and click
. Then, select the original driver and click
4. I am trying to add a printer driver to the appliance, but I keep getting an "unauthorized to
perform this action" error message.
In order to install drivers onto the appliance, a user must be logged onto their PC with a user account
that has permission to install software on that PC, and have a corresponding administrator account on
the appliance. If NT domain authentication is enabled (on the
administrator accounts on the appliance can be set up on the
web interface under Admin Accounts). If NT domain authentication is not enabled, the user must set up
a local administrator account
account.
5. I added a Windows 2000 driver to the appliance, but it did not show up in the driver list.
Drivers for Microsoft Windows NT 4.0 usually work with both Windows 2000 and Windows XP.
Consequently, many vendors will label a driver as Windows 2000 or XP when the driver conforms to
the NT 4.0 driver specification. As a result, Windows 2000 drivers can show up as Windows NT drivers.
6. I added a Windows XP driver to the appliance, but it did not show up in the driver list.
Drivers for Microsoft Windows NT 4.0 usually work with both Windows 2000 and Windows XP.
Consequently, many vendors will label a driver as Windows 2000 or XP when the driver conforms to
the NT 4.0 driver specification. Since there is no unique XP driver specification, drivers labeled by a
printer vendor for XP will always appear as either NT 4.0 or Windows 2000 drivers.
7. Why am I getting the "Driver information not found" error when I try and add two drivers to the
appliance at the same time?
When you add multiple drivers to the appliance at the same time, the names for those drivers (as
recorded in their .inf files) must match. If the driver names in the .inf files do not match, you will receive
a driver installation error indicating the discrepancy. These drivers will need to be installed separately.
If you are trying to install both an NT and a 2K driver for the same printer, consider adding the same
on the appliance, with a name and password that matches their NT user
again.
Microsoft Networking Settings
Domain Account page
page),
(in the appliance's