HP 4200 User Manual page 79

Driver information not found:
The driver information in <filename> does not match
the selected printer model <driver_name>. Please
specify another driver setup information file (*.inf) for
<OS>. For more details on driver name mismatches,
refer to the Online Manual.
Unauthorized to Perform this Action:
You are logged into the PC as : <user name>. That
user does not have administrative rights on this print
server appliance. To perform this action, you must be
logged into Windows with a user name that has: *
administrative rights on this PC * administrative rights
(a corresponding admin account) on the print server
appliance
Driver could not be initialized:
This driver could not be initialized on the print server
appliance, so it has been disabled for automatic driver
download (i.e., Point and Print). Clients will have to
supply their own driver.
Try adding this driver again. Add the version of this
driver that supports this PC's operating system first.
Then add drivers for additional operating systems.
Driver could not be initialized:
This PC has no FILE: port. A file port is required to
perform the necessary driver initialization. Please
re-install the file port on this PC before adding more
drivers to the print server appliance.
This driver could not be initialized on the appliance, so
it has been disabled for automatic driver download
(i.e., Point and Print). Clients will have to supply their
own driver.
The name of the printer driver specified in the
indicated file does not match the name of the printer
driver in the other driver .inf files being installed.
If you are trying to install both an NT and a 2K
driver, consider adding two printers to the appliance:
one with the NT driver and the second (same printer
with a different name) with a 2K driver.
If you are trying to install a 9x driver and the name
does not match, it is possible that the driver names
provided for different operating systems are not the
same. If this is the case, please
In order to install printer drivers onto the appliance,
they must be initialized. In order to run driver
initialization, a user must:
be logged onto their PC with a user account
that has permission to install programs on that
PC, and
have a corresponding administrator account
on the appliance.
Verify that the user account being used has these
permissions.
In order for drivers to be deployed to client
machines via point and print, the drivers must be
properly initialized. If a driver has failed to initialize
it will be disabled by the appliance and cannot be
enabled (but it can be re-installed).
A disabled driver may still be associated with a
printer, but when a client tries to install that printer
the driver files will not be provided by the appliance
and the user will be prompted to provide the printer
driver files.
In order for driver initialization to run, a
FILE: port must be installed on your PC. Because
the driver could not be initialized, it has been
disabled. Please reinstall the FILE: port and then
reinstall this driver.
contact HP support.