HP 4200 User Manual page 80

Application error:
This application experienced an error <error
description>. Try running it again. If the problem
persists, consult the help file or the on-line
documentation. (Possible errors are listed below.)
Add printer driver failure
Printer driver is not compatible with OS
Insufficient memory
Can't build driver info from *.inf file
Initialization setup file queue failure
Commit setup file queue failure
Access denied
Cannot find MFG
File not found
Server not found
Driver not found
Driver does not match OS:
The driver information file <filename> that was
specified for Windows 2000/XP is actually a driver
information file for Windows NT 4.0. The specified
driver has been installed, but it will appear in your
driver list as a Windows NT 4.0 driver. This driver
may or may not be compatible with Windows
2000/XP. HP recommends that you test the driver
thoroughly. For more information about drivers,
consult the online manual.
Driver does not match OS:
<filename> is not the correct driver information file
for Windows NT 4.0. To add a driver for Windows NT
4.0, rerun this Add Driver wizard and specify the
correct driver setup information file (*.inf). For more
information about drivers, consult the online manual.
The application performing the driver installation
and initialization has experienced an error. This
error may be generated by a variety of problems
from network communication issues to .inf file
corruption.
Verify the following:
that the appliance network configuration
information are correct and running (for
example, WINS server or manually specified
domain controller addresses), and
the provided .inf files are valid printer setup
information files and that the correct
operating system has been associated with
each .inf file.
Try using a different copy of the desired driver or a
different driver. If the problem persists, please
contact HP support.
The driver you specified for Windows 2000/XP is
really a Windows NT 4.0 driver and has been
installed as such.
Although this driver will probably work, you may
wish to determine if there is a "native" 2000/XP
driver available for this printer. To do this, locate
and install the native Windows 2000/XP driver in
order to ensure this driver works properly with
Windows 2000 and Windows XP.
If you choose not to find the native driver, make
sure to test the driver thoroughly after it has been
installed and initialized.
The .inf file specified for the Windows NT 4.0
driver is not a Windows NT 4.0 driver file.
You will need to re-run the Add Driver wizard and
either specify the correct operating system for this
.inf file, or specify a Windows NT 4.0 .inf file.