HP 4200 User Manual page 126

Initiated standard shutdown (102)
Level: Informational
Category: Administrative
Description: The appliance was shutdown safely. This is generally done by using the power
button on the front panel
Completed standard startup (103)
Level: Informational
Category: Administrative
Description: The appliance completed startup. The preceding shutdown was a safe shutdown
(typically through the power button on the front panel or through the web interface).
Completed non-standard startup -- followed abrupt shutdown (104)
Level: Informational
Category: Administrative
Description: The appliance completed startup after an abrupt shutdown, perhaps from a power
disruption.
Action: Non-standard startups may require the appliance to restore the operating system from a
safe copy. If configuration data (e.g. networking, printer, and driver settings) is no longer
resident on the appliance, use a
Running on UPS battery due to power failure (105)
Level: Informational
Category: Administrative
Description:A power failure occured and the appliance began relying on the Uninterruptable
Power Supply (UPS) battery for its power.
Shutdown initiated due to low UPS battery (106)
Level: Informational
Category: Administrative
Description: After a power disruption, the appliance is schedule to run for one minute on the
Uninterruptable Power Supply (UPS) battery. This permits a safe shutdown of the appliance.
However, during this period, the UPS reached a power level that was too low and, in response to
this, the appliance shut itself down. The battery might be weak or old. Or the power might have
cycled multiple times but the battery did not have a chance to recharge.
or through the web interface (Restart).
backup to restore the settings.