ABB PGC2000 Operation And Service Manual page 24

Digital I/O
DIP switch
drift
EIA
elution time
EMC
EMI
Engineering Data
Package
EPC
EPROM
E2PROM
FID
field
forced gating
Gate On/Off
GC
GCC
Help key
highway address
HL
G-2
GLOSSARY (continued)
Digital Input/Output PCB; enables the use of additional stream valves and/or
alarm sensors
PCB switch that is used to set values through hardware instead of software
the variances from the baseline or the norm; generally associated with
uncontrolled or unwanted changes in pressure or temperature
Electronic Instrument Association
the amount of time from the start of analysis that it takes for a peak to be fully
detected
electromagnetic compatibility
electromagnetic interference
see Data Package
Electronic Pressure Control
Erasable, Programmable, Read Only Memory; program software that can be
erased and reprogrammed a limited number of times
Electrically Erasable Programmable Read Only Memory; used for the safe
storage of tables (sometimes written E
Flame Ionization Detector
highlighted area on display screen where data entry and modification are
allowed; data entry is ended (terminated) by filling the field with characters or by
pressing ENTER or any soft key or cursor key
technique of chromatographic data collection in which the controller collects the
detector signal during a specified period of time
the time-coded function command which turns on and off the collection of data
from the detector
Gas Chromatograph
Gas Chromatographic Controller
front panel control key used to access information pertaining to the current
screen display content
numbers from one to 32 that uniquely identify remote GCCs
High Limits, entered into a component table; when a component's measured and
calculated value exceeds the HL value, an alarm is generated
2
PROM or EEPROM)
2000-OSM, F1