Table of Contents
Advertisement
GET MAXIMUM PEAK PARAMETER Function
Description:
Returns the Sim Dis Maximum Peak parameter from the Sim Dis Setup
Screen (Sim Dis analyzers only).
Syntax:
GET_MAX_PEAK_PARM
Example:
0010 LPRINT GET_MAX_PEAK_PARM
Prints Max Peak from the Sim Dis Setup Screen.
GET MULTIPLIER EXPONENT Function
Description:
Returns the method table's multiplier exponent.
Syntax:
GET_MULTIPLIER_EXP(method%)
Comments:
method% is the method table (1-8).
Example:
0010 A% = GET_MULTIPLIER_EXP(1)
Gets the multiplier exponent from analysis method one and assigns it to
integer variable A%.
GET OUTSTANDING REQUESTS Function
Description:
Returns the number of pending requests in Analysis Request Queue.
Syntax:
GET_OUTSTANDING_REQUESTS
Example:
0010 IF GET_OUTSTANDING_REQUESTS
0020 :<>0
0030 :THEN ZERO_OUTSTANDING
0040 :_REQUESTS
All requests are deleted if there are any requests in the Analysis Request
Queue.
GET PEAK TYPE PARAMETER Function
Description:
Returns the Sim Dis Peak Type from the Sim Dis Setup Screen (Sim Dis
analyzers only).
Syntax:
GET_PEAK_TYPE
Comments:
0 means peaks are selected by area
1 means peaks are selected by height
Example:
0010 LPRINT GET_PEAK_TYPE
The Sim Dis Setup screen parameter, Peak Type, is printed on the
teleprinter.
GET PERCENT OFF FOR A TEMPERATURE Command
Description:
Returns the percent off for a given temperature using a specified Time vs.
Boiling Point Table (Sim Dis analyzers only).
Syntax:
GET_POFF(temperature!,time_vs_bp_table%)
Comments:
temperature! is the temperature to convert to a percent off.
time_vs_bp_table% is the Time vs. Boiling Point Table (1-8) to use for the
conversion.
Example:
0010 PERCENT! = GET_POFF(212.0,1)
Returns the percent off for 212.0 degrees.
GET PERCENT OFF FOR A TIME Command
Description:
Returns a percent off for a given time using a specified Time vs. Boiling
Point Table (Sim Dis analyzers only).
Syntax:
TIME_TO_OFF(time!,time_vs_bp_ table%)
2000-OSM, F1
10-13
Advertisement
Table of Contents
Troubleshooting
