Background Screen, Simultaneous Dual Detectors - ABB PGC2000 Operation And Service Manual

Figure 4-6). While the Background screen provides information on both detectors, other screens will
show the data from only one of the two detectors at a time.
Figure 4-6. BACKGROUND SCREEN, SIMULTANEOUS DUAL DETECTORS
To select or change which detector's data is viewed, press the F2 (Manual Control) soft key on the
Background screen. On the Manual Control Mode screen, press the F2 (Detector and Graphics) soft
key. When the Chroma Board screen appears (see Figure 4-7), the top line identifies the board
whose data is shown.
**********
4-7
********** B A C K G R O U N D
ABB Analytical GCC
803V031-1R (Sim Dual Det)
19-JUN-2002 WED
Analysis Time: 0863/1080
Stream/Method: 20/01
Purging : 01
#Peaks/State : 10/Baseline
Key Component: HEXANE +
Exit Manual
to Control
Commands
F1
Chroma Board #?
Chroma Board #: [ 1 ]
Select
Escape Chroma Bd
and View
F1 F2
Figure 4-7. FIRST CHROMA BOARD SCREEN
Remote 0.1
(C) 2001
15:52:34
Chroma 1 Chroma 2
0863/1076
19/02
02
03/Baseline
E-MERCAPT.
0.394 4.188
Cur Report,
Basic I/O &
Options
F2 F3
Select
Chroma Bd
and Exit
F3
**********
Alarms
F4
**********
F4
2000-OSM, F1