GE iBox Installation And Maintenance Manual page 38

iBox/iBox Kit
Installation and Maintenance Guide
Creating a New iBox Device
Introduction Creating an iBox device in SGConfig has two main steps:
• Create the new device
• Specify the device properties
This procedure assumes that you are using the default firmware already loaded in the
iBox or have created a firmware set.
iBox Device When you create a new iBox device, select the iBox device template to see the
Icon appropriate configuration screens.
Procedure: To create a new iBox device:
Creating a
Step
New iBox
Device
1
2
3
4
5
38
Open the project in which you want to create the iBox device.
Drag and drop an iBOX device template from Local Repository >
Device Templates into the project tab area.
Click Edit group > Properties command.
Result: The iBOX Device Wizard appears.
In the Name box, type a unique name for the device.
Continue to "Procedure: Setting iBox Device Properties".
994-0047-5.10-4
GE Grid Solutions
Action
Continued on next page
GE Information