GE iBox Installation And Maintenance Manual page 73

GE Grid Solutions
Initialization Errors
Overview Several error situations, related to initialization, can occur with file transfers. The
most common case will be that the configuration and code in the Boot File are those
in the memory of the client causing the client to initialize immediately. Other
possibilities
BootROM Error
TFTP Error
Applications Not
Enabled
System Restarts
Only diagnostic input
can be entered
System error
GE Information
exist.
Symptom
Configuration was not completed
or data corruption has occurred at
the server
Configuration was not completed
or data corruption has occurred at
the server
Data download failure
No configuration is detected in
either NVRAM or in EPROM on
start-up
No configuration is detected in
either NVRAM or in EPROM on
start-up
Installation and Maintenance Guide
Possible Causes
994-0047-5.10-4
iBox/iBox Kit
Suggestions
Press escape to reset
Use WESMAINT to view
the error message
Use WESMAINT to view
the error message
Use WESMAINT to view
the error message
Download a
configuration remotely
via the system monitor,
and reboot
Download a
configuration remotely
via the system monitor,
and reboot
73