Dell DR4000 Administrator's Manual page 108

FILE LOCATION: C:\Users\bruce_wylie\Documents\~Dell
Docs\~FINAL_DR4000_1.0.1.1_DOCS\~Final_1.0.1.1_DR4000_Admin_Guide_Files\~3-
Table 8-2. DR4000 System Event Messages
System Event Message
System Event = Type 1
NVRAM signature is missing.
The Windows Active Directory
client module has failed to start,
and Active Directory support will
not be available.
The Windows Active Directory
client module has been started.
The Windows Server module has
been started.
The Windows Server module has
been restarted.
The Windows Server module is
down, and all Windows client
access will be disrupted.
The Windows Server module has
been disabled because of multiple
failures.
System initialization is required.
File filesystem system maintenance
is requested.
Filesystem server has been restarted. Informational message. No user intervention is
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 5 / 1 2 - F O R P R O O F O N LY
100
Troubleshooting and Maintenance
Description/Meaning or Action
Contact Dell Support for support assistance or
intervention. If the NVRAM was replaced
recently, use maintenance --hardware
--reinit_nvram to initialize the NVRAM.
Reboot the DR4000 system. If issue persists,
contact Dell Support for assistance or
intervention.
Informational message. No user intervention is
required.
Informational message. No user intervention is
required.
Informational message. No user intervention is
required.
Reboot the DR4000 system. If issue persists,
contact Dell Support for assistance or
intervention.
Reboot the DR4000 system. If issue persists,
contact Dell Support for assistance or
intervention.
Contact Dell Support for support assistance or
intervention. For more information, see
"Initializing the DR4000 System" on page 13.
Contact Dell Support for support assistance or
intervention. For more information, see"About
the DR4000 Maintenance Mode" on page 118.
required.