Configuring Active Directory Settings - Dell DR4000 Administrator's Manual

FILE LOCATION: C:\Users\bruce_wylie\Documents\~Dell
Docs\~FINAL_DR4000_1.0.1.1_DOCS\~Final_1.0.1.1_DR4000_Admin_Guide_Files\~3-
3 In the Compression Level list, choose the Compression Level you want to
use for the system from its choices (Fast or Best).
4 Click Set Compression Level to configure the system using this setting (or
click Cancel to display the Compression Level page).
The Updated Compression dialog is displayed when the selection is
successful.

Configuring Active Directory Settings

You need to configure this setting if you want your DR4000 system to join a
domain that contains a Microsoft Active Directory Service (ADS).
To configure the system for a domain with ADS:
1 Select System Configuration Active Directory.
The Active Directory page is displayed.
NOTE:
If you have not configured Active Directory settings, an informational
dialog is displayed in the Active Directory page.
2 Click Join on the options bar.
The Active Directory Configuration dialog is displayed.
3 Type the following values in the Active Directory Configuration dialog:
• In Domain Name, type a fully qualified domain name (FQDN) for
the Active Directory Service (for example, AD12.acme.com).
• In Username, type a valid user name that meets user name guidelines
for the Active Directory Service.
In Password, type a valid password that meets password guidelines for
•
the Active Directory Service.
4 Click Join Domain to configure your system with these ADS settings (or
click Cancel to display the Active Directory page).
The Successfully Configured dialog is displayed when successful.
NOTE:
If you have configured a CIFS container share path, this will be
displayed in a CIFS Container Share Path pane in the Active Directory page.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 5 / 1 2 - F O R P R O O F O N LY
Configuring the DR4000 System Settings
39