Logging On Using A Web Interface - Dell DR4000 Administrator's Manual

FILE LOCATION: C:\Users\bruce_wylie\Documents\~Dell
Docs\~FINAL_DR4000_1.0.1.1_DOCS\~Final_1.0.1.1_DR4000_Admin_Guide_Files\~3-
NOTE:
Before you log into the system using the DR4000 system GUI, make sure to
register it in the local Domain Name System (DNS) for your network so that it is a
DNS-resolvable entry.
NOTE:
At this point, you could modify the bonding mode to use 802.3ad if this
configuration is available in your network.

Logging on Using a Web Interface

To log on to the DR4000 system using a browser-based connection:
1 In a supported web browser, type the IP address or hostname of the system
in the browser Address field, and press <Enter>.
The DR4000 System Login page is displayed.
NOTE:
If you want to reset your login password, click Reset Password on the
DR4000 System Login page. The Reset Password dialog is displayed. In
Service Tag, enter the service tag number ID for the system, and click Reset
Password to reset the system password back to its default setting (or click
Cancel to return to the DR4000 System Login page).
2 In Password, type
The Initial Software Upgrade page is displayed and prompts you to verify
the current installed system software version (see Figure 3-3). For more
information, see "Verifying the Current Software Version" on page 77.
Figure 3-3. Initial Software Upgrade Page
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 4 / 5 / 1 2 - F O R P R O O F O N LY
18
Setting Up the DR4000 System
and click Log in or press <Enter>.
St0r@ge!