Siemens SIMATIC Operating Instructions Manual page 104

Fail-Safe Electronic Modules
8.2 4 /8 F-DI/4 F-DO DC24V/2A PROFIsafe Digital Electronic Module
Electrical isolation
•
•
•
•
•
•
Permissible potential difference between
•
•
•
•
Insulation tested during type test with
•
•
•
Current consumption
•
•
•
Power loss of module
Status, Interrupts, Diagnostics
Status display
•
•
•
Interrupts
•
Diagnostic functions
•
•
•
Sensor Supply Outputs
Number of outputs
Output voltage
•
Output current
•
•
•
•
•
104
Between channels and backplane bus
Between channels and power supply
Between DIs
Between DOs
Between DIs and DOs
Between channels/power supply and shield
Shield and ET 200pro bus connection
Shield and I/O (DIs, DOs)
ET 200pro bus connection and I/O (DIs, DOs)
Between DIs and DOs
Shield and ET 200pro bus connection
Shield against I/O (DOs)
ET 200pro bus connection against I/O (DOs)
From backplane bus
From the electronic supply (without load)
From load voltage L+ (without load)
Inputs
Outputs
Sensor supply
Diagnostic interrupt
Group fault display
Diagnostic information can be read out
I&M functionality *
Loaded
Rated value
Permissible range
Permissible aggregate current of outputs
Short-circuit protection
Operating value
Technical Specifications
Yes
No
No
No
Yes
Yes
75 V DC/60 V AC
75 V DC/60 V AC
75 V DC/60 V AC
75 V DC/60 V AC
350 V AC/1 min
350 V AC/1 min
350 V AC/1 min
Max. 20 mA
Typ. 100 mA
Typ. 50 mA
Typ. 5.8 W
Two-color red/green LED per channel
Two-color red/green LED per channel
LED VsF and display via channel LEDs of
channel groups
Channel LED red
Red LED (SF)
Possible
See "ET 200pro Distributed I/O" Manual
2
Min. L+ (-1.5 V)
200 mA
0 mA to 200 mA
400 mA
Yes, electronic
0.7 A to 2.1 A
ET 200pro Distributed I/O System - Fail-Safe Modules
Operating Instructions, 05/2007, A5E00394073-02