Siemens SIMATIC Operating Instructions Manual page 41

Use in Industrial Environment
SIMATIC products are designed for use in industrial environments.
Area of Application
Industry
Use in Residential Areas
If you are using the ET 200pro in residential areas, you must ensure compliance with limit
class B for emission of radio interference in accordance with EN 61000-6-4.
Suitable measures for achieving a limit class B radio interference level are:
● Installation of the ET 200pro in grounded control cabinets/control boxes
● Use of filters in supply lines
TÜV Certificate and Standards
Fail-safe modules are certified to the following standards. Refer to the report accompanying
the TÜV certificate for the current version/edition of the standard.
Standard/Directive
Standards/Directives for Functional Safety
Standards/Directives for Process Engineering
Standards/Directives Machine Safety
Standards/Directives for Burner Management
Systems
Additional Standards/Guidelines
The current TÜV certificate report is available for downloading on the Internet at
https://support.automation.siemens.com under "Product Support".
ET 200pro Distributed I/O System - Fail-Safe Modules
Operating Instructions, 05/2007, A5E00394073-02
Requirement for
Emitted Interference
EN 61000-6-4
Designation
IEC 61508-1 to 7
prEN 50159-1 and 2
VDI/VDE 2180-1 to 5
NE 31
ISA S 84.01
IEC 62061
98/37/EC
EN 60204-1
EN/ISO 954-1/13849-1
prEN 954-2
DIN VDE 0116, Clause 8.7
prEN 50156-1
EN 230, Clause 7.3
EN 298, Clauses. 7.3, 8, 9, and 10
DIN V ENV 1954 (stop to position)
DIN VDE 0110-1
DIN VDE 0160
93/68/EEC
92/31/EEC and 93/68/EEC
DIN EN 55011 (stop to position)
EN 50081-2 (stop to position)
EN 61000-6-2
DIN EN 61131-2
General Technical Specifications
6.1 Standards and Approvals
Interference Immunity
EN 61000-6-2
41