Panasonic KX-T336 System Reference Manual page 995

Description of Assigning Items
NL-Code
Baud Rate
Word Length
Parity
Stop Bit
Conditions
t is possible to change assigning items in "System-Communication Interface" while
I
On-site administration or Remote administration is performed or SMDR is being
printed out. New setting becomes effective when those operation modes are
finished.
Function
The following functions appear on the function line of this setting screen.
1 COMMON 2
COMMON (SHOW LV, CHG LV, INS, OUS, REMOVE, EXIT) and HRD CPY keys
are available in this setting screen.
For operation, refer to Section 7-I "Operation of Function Keys."
Assigns the New Line code, for Carriage Return, for SIO #1 (Terminal),
SIO #2 (SMDR : Station Message Detail Recording) and Remote (MODEM).
Assigns the Baud rate for SIO #1, SIO #2 and Remote. The baud rate is the
number of bits transmitted per second between this system and the device.
Assigns the data length for SIO #1, SIO #2 and Remote. The data length is the
number of bits required per character.
Assigns the type of Parity check for SIO #1, SIO #2 and Remote. Mark and
space means that there is a fixed polarity parity bit for each character. Even and
odd means that the number of bits including the parity bits is even or odd.
(1,3,5,7,9 etc. is odd 2,4,6,8, etc. is even)
Assigns the number of Stop bit for SIO #1, SIO #2 and Remote. Stop bits are
used to signal the end of a character and that the next bit received is the start bit
of the next character.
3 4 5 6 HRD CPY 7
9-D-67
8