Panasonic KX-T336 System Reference Manual page 655

2.00 Background Music (BGM)
through External Pager
Description
The system can provide up to two external music
sources. The music source can be broadcast as
background music (BGM) through external
pagers.
Starting or stopping BGM can be executed by the
Operator 1 (Attendant Console or extension user)
in the same tenant that the external pagers and
external music equipment belong to.
To start and stop this function, use the same
feature number for "BGM Through External
Paging."
Dialing the feature number while BGM is on
stops BGM, and reversely starts BGM while BGM
is off.
To activate this feature, external music
equipment and an external pager should be
connected to the system, and assign "System-
Operation", External Music Source 1, 2 and
External Paging 1, 2 to "Yes" by the system
programming.
"Trunk-Pager & Music Source", External Pager-
BGM should be assigned to "Yes" to use this
function. This assignment can be done to each
external pager.
Also assign "Trunk-Pager & Music Source",
Music Source-For Use to either "BGM" or "Hold
& BGM." This assignment can be done to each
external music equipment.
Programming
System Programming
"System-Operation (1/3)",
External Paging 1, 2
External Music Source 1, 2
"System-Numbering Plan (08/11)",
BGM Through External Paging
"Trunk-Pager & Music Source",
External Pager-Tenant
External Pager-BGM
Music Source-Tenant
Music Source-For Use
Conditions
If Tenant Service is employed, it is possible to
attach each external music equipment and
external pager to a tenant by using "Trunk-Pager
& Music Source", External Pager-Tenant and
Music Source-Tenant.
This function is effective only when an external
pager and an external music equipment are
connected and programming has been
completed. Otherwise, the user hears reorder
tone after executing the operation to activate this
function.
5-F-8
(70695)
Reference
VT Dumb
9-D-1.01 10-C-4.00
9-D-6.08 10-C-10.00
9-F-2.00
10-C-19.00
10-C-20.00