Panasonic KX-T336 System Reference Manual page 477

3.02 Directed Call Pickup
Description
Directed Call Pickup allows any extension user to
answer the call ringing at an extension in any call
pickup group by dialing the feature number for
"Directed Call Pickup," and then the directory
number of the ringing extension.
Programming
System Programming
"System-Numbering Plan
(03/11)",
Directed Call Pickup
Conditions
It is possible to execute Directed Call Pickup
after holding the current call.
An extension user who has Do Not Disturb
assigned can answer a call that is ringing at other
extensions.
This feature is not available to answer the
following calls:
<1> A call ringing at an extension on which Dial
Call Pickup Deny is set
(Refer to Section 4-D-3.03 "Call Pickup
Deny" for further information.)
<2> A call ringing on PCO button
<3> A call ringing on ICM button
<4> A call arriving at an extension but not ringing
(Refer to Section 3-D-3.02 "Flexible Ringing
Assignment-Delayed Ringing" for further
information.)
For the above calls, reorder tone sounds after
dialing the feature number for "Directed Call
Pickup" and the following message appears on
the display, if provided:
No Incoming Call
Reference
VT Dumb
9-D-6.03 10-C-10.00
4-D-8
(70695)
Operation
Picking up a call ringing at an extension in the
different call pickup group
1. Lift the handset or press the SP-
PHONE button.
2. Dial the feature number for
Directed Call Pickup "48"
(default).
3. Dial the directory number of the
ringing extension.
• You hear confirmation tone 3.
• Talk to the caller.
4. Start Conversation.
Note:
• Confirmation tone 3 for Call Pickup can be
eliminated by WS4 command (See Section 10-
C-62.00 "World Select 4 (WS4)").