Panasonic KX-T336 System Reference Manual page 80

1.02 Guide Plate
Card Latch
1. Before installing the service cards, remove the Guide Plate (See Fig.1) from the
upper front side of the basic shelf (and expansion shelf 1 and 2, if provided) by
loosening the five screws.
2. Install a service card (with facing the components side to the right) along with the
upper and lower guide rails. Press the upper and lower latch firmly until the upper
latch is located inside of the shelf. (See Fig.2 and Fig.3)
Please do not touch the components side of the service card.
3. After installing the service cards, attach the Guide Plate to the upper front side of
the basic shelf (and expansion shelf 1 and 2, if provided) with five screws.
If service cards are not installed properly, the Guide Plate will not be fixed.
(Front Side)
Fig.2
2-C-2
Screw
Guide Plate
Fig.1
(Rear Side)
Fig.3