Panasonic KX-T336 System Reference Manual page 747

F. Holding Features
1.00 Hold
Description
Allows the attendant to hold the current call
temporarily by pressing the HOLD key.
This is effective only for a call on the SRC side of
a LOOP key.
A call on the DES side of the LOOP key can not
be placed on hold.
To place a call on hold, press the HOLD key.
To retrieve a held call, press the LOOP key in
holding status.
Programming
None
Conditions
Up to six calls can be placed on hold at the
attendant console.
Calls held by the attendant console can not be
retrieved by other extensions.
Holding the other attendant console and
doorphone calls is impossible.
If a held call has not been answered more than a
pre-assigned time, transfer recall tone may
sound at attendant console.
Refer to Section 3-E-2.00 "Held Call Reminder"
for further information.
If a held call is not answered for more than 30
minutes, it will be disconnected automatically.
Operation
Holding a call
During a conversation with an outside or inside
party, the SRC indicator of the corresponding
LOOP key is lit.
1. Press the HOLD key.
HOLD
• The other party is placed on
• The DES indicator of that
Retrieving a held call
The SRC indicator is flashing and the DES
indicator is lit.
1. Press the LOOP key in holding
DES
status.
SRC
LOOP
• Conversation with the SRC
• The SRC indicator of the
6-F-1
hold. The SRC indicator of the
corresponding LOOP key starts
flashing in 60 wink.
LOOP key lights, and dial tone
sounds.
side party is established.
corresponding LOOP key is lit,
the DES indicator light goes
out.